Toshiba e-STUDIO 170F - Manual (Page 106)

104
The Automatic Reception
Mode (AUTO RECEIVE) is nor-
mally selected. You can
change the reception mode by
pressing the
AUTO
key.
Refer to Reception Mode se-
lection on page 62.
Press:
AUTO
This facsimile can use A4, Letter and Legal size paper. The received document is recorded (printed)
within the Effective Recording Area of the paper.
NOTES:
• If the received document is equal to or shorter than the recording area of the paper, the re-
ceived document is printed at its actual size.
• If the received document is larger than the recording area of the paper, it will be vertically and
horizontally reduced to fit on the recording paper installed. The reception will be divided onto
two sheets if the document needs to be reduced to smaller than 73%* of its original size.
*Reduction standard ratio for every paper
• If you desire to receive large originals without reduction or excessive paper usage, set the
“DISCARD” function to “ON.” If the lower part of the original exceeds the recording paper by 13
mm or less, the image will be automatically discarded. This predetermined dimension is a ser-
vice function setting. Contact your Toshiba dealer for setup.
• If the “RX REDUCTION” function is “OFF”, the larger original will be recorded on two or more
sheets. The top of the second page will repeat about 5 mm of the lower part of the first page.
Selecting the Reception Mode Recording Paper Size
If Auto Receive mode is se-
lected, press:
If FAX/TAD mode is selected,
press:
If TEL/FAX mode is selected,
press:
If Manual Receive mode is se-
lected, press:
Effective
Recording
Area
B
A
C D
Document
Recording
Paper
4.MANUAL
3.TEL/FAX
2.FAX/TAD
RECEPTION MODE
1.FAX
Paper Size
A4 : mm
inches
Letter: mm
inches
Legal : mm
inches
B
202
7.9
208
8.2
208
8.2
D
279
11.7
279
11.0
356
14.0
A
210
8.3
216
8.5
216
8.5
C
289
11.4
271
10.7
348
13.7