Toshiba e-STUDIO 170F - Manual (Page 150)

148
Send after Scan Default Setting
Display the SEND
AFTER SCAN Menu 1
This feature enables you to de-
termine whether the dialing
starts while the machine is
scanning the documents or af-
ter the machine has scanned
all documents in the Memory
Send mode.
Also, if dialing after scanning is
selected, you can select to de-
lete or send the scanned pages
when the memory becomes full
during scanning.
Press:
+
+
+
+
Select the Send
After Scan Option 2 Select the Memory
Full Option 3
Select the desired Memory Full
Option.
To cancel the page being
scanned, press:
Go to Step 3.
To disable Send After Scan,
press:
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
COMPLETED
After completing this Configu-
ration Setting, you may con-
tinue to select other settings
referring to their associated
pages for instructions, or press
Select Another
SETUP Item, or ... 4
MENU
Select the desired Send After
Scan Option.
To enable Send After Scan,
press:
Go to Step 4.
The following is displayed for 2
seconds.
To send the pages being
scanned, press:
NOTE:
Even if is selected,
transmission will not start
when memory full occurs at
the first page.
to exit the Configuration Set-
ting mode and return to the
Standby Mode.
STOP
1.ON
SEND AFTER SCAN
2.OFF
COMPLETED
2.SEND SCANNED PAGES
UPON MEMORY FULL
1.CANCEL SENDING