Toshiba e-STUDIO 170F User Manual

Page 87

This setting will select the de-
fault setting whenever a docu-
ment is set in the facsimile for
transmission. Manual settings
(if selected for a particular doc-
ument) will take precedence
over default settings.

Press:

Select the desired resolution
setting by pressing one of the
following keys.

Select STANDARD mode for
sending normal text and graph-
ics by pressing:

Select FINE mode for sending
normal text and graphics with
extra clarity by pressing:

Select U-FINE (Ultra-Fine) for
sending fine text and graphics
with extra clarity by pressing:

Default Setting for Document Mode (Resolution and Contrast)

Select the
Resolution

Display the
DOCUMENT MODE
Menu

Select the default contrast
level by pressing one of the
following keys.

Select NORMAL for normal
documents by pressing:

Select DARKER to darken light
originals (i.e., for documents
with light or faint print) by
pressing:

Select LIGHTER to lighten
dark originals (i.e., for docu-
ments with dark print) by
pressing:

Select the Contrast

After completing this Configu-
ration Setting, you may con-
tinue to select other settings
referring to their associated
pages for instructions, or press

STOP

to exit the Configuration Set-
ting mode and return to the
Standby Mode.

Select Another
SETUP Item, or ...

Displayed for 2 seconds

Returns to display the SETUP
menu screen.

3.U-FINE

2.FINE

DOCUMENT MODE

1.STANDARD

3.LIGHTER

2.DARKER

CONTRAST

1.NORMAL

COMPLETED