Toshiba e-STUDIO 170F User Manual
Page 15
13
10.REDIAL/PAUSE Key
Press this key to redial a facsimile/telephone number if the number was busy on
your first try (see page 100). Or, use this key to enter a pause between tele-
phone digits when entering a remote facsimile number.
11.MONITOR Key
Used to enable the speaker monitor, for monitoring call progress during non
memory document feeder transmissions (see page 98).
12.SHIFT Key
Press this key prior to selecting One Touch keys No.20 to No.38.
13.JOB STATUS Key
Displays the communication status of reserved transmissions (see page 105).
14.CONTRAST Key and DARKER, LIGHTER Lamps
Select the desired contrast level of transmit document or copying. When normal
mode is selected, none of the CONTRAST lamps will be illuminate (see page
84).
15.ENTER Key
Press this key to enter a selected menu item or select a menu entry.
16.Menu Keys (
MENU
,
,
,
Keys)
These keys are used to scroll through LCD menu prompts (see page 35).
17.MODE Key and FINE, U-FINE, HALFTONE Lamps
Select the desired resolution for transmission or copying. When Standard mode
is selected, none of the MODE lamps will be illuminated (see page 83).
18.JOB CANCEL Key
Used to cancel a job reserved or being performed (see page 106).
19.Dial Keypad
Use these 12 keys just like a telephone keypad to dial telephone/facsimile num-
bers (see page 35).
The dial keys are also used to enter alphanumeric characters for remote parties
names, etc. (see page 36).
The
is also used as the [TONE] Key. The
key is helpful to access
various services requiring touch-tone dialing when you are connected to a Rotary
line (see page 106).
20.SUPER ENERGY SAVER key and SUPER ENERGY SAVER Lamp
Press this key to select the Super Energy Saver Mode.
Illuminated when the facsimile is in the Super Energy Save Mode.
21.COPY Key
Press this key, with a document in the Document Support, to copy a document
(see page 87).
22.STOP Key
Used to stop operation or cancel system programming. This key is also used to
clear an error condition.
23.START Key
Press this key to start facsimile communication. This key is also used to com-
plete programming.