Toshiba e-STUDIO 170F - Manual (Page 20)

18
Fit the tabs of the Document
Support into the slots on the
top side of the unit.
• Do not place heavy objects
on the Document Support or
apply strong force.
NOTE:
It may be necessary to gen-
tly bow the base of the sup-
port toward you as you
place the support into posi-
tion.
Document Support
Document Support
Installation
Hold the Front Cover by the
grips on both sides of its upper
part and pull it down to open it.
NOTE:
Do not pull the Front Cover
too strongly when opening
it.
Open the Front Cover
Fit the tabs of the Recording
Paper Exit Tray onto the posts
on the back side of the unit.
• Do not place heavy objects
on the Recording Paper Exit
Tray or apply strong force.
Recording Paper Exit Tray
Recording Paper Exit
Tray Installation
Document Exit Tray
Fit the tabs of the Document
Exit Tray into the slots on the
front side of the unit.
• Do not place heavy objects
on the Document Exit Tray
or apply strong force.
• Extend the Document Exit
Tray Extension for long
documents.
Document Exit Tray
Installation
Press up the Front Cover until
it clicks to attach securely.
Close the Front Cover