Toshiba e-STUDIO 170F - Manual (Page 163)

161
This section describes the pro-
cedure to manually de-activate
Secure RX.
This function will permit you to
temporarily de-activate Secure
RX to printout documents re-
tained within memory.
NOTES:
• In order to manually de-
activate Secure RX, you
must first activate Secure
RX. (See page 153).
• If the Secure RX has been
set to ON, the facsimile
activates it automatically
after a document, which
has been stored in the
memory, is output.
Press:
+
+
To temporarily de-activate Se-
cure RX, press:
Secure RX Temporary Stop
Display the SECURE
RX Menu 1
ENTER SECURITY CODE
[ ]
SECURE RX
1.TEMPORARY STOP
Select TEMPORARY
STOP 2 ENTER the Security
Code 3
COMPLETED
Then press:
ENTER SECURITY CODE
[****]
NOTE:
If Secure RX Activation is
set to OFF, an error will re-
sult in the operation above.
The message “SETTING IS
OFF” will be displayed for 2
seconds, then the screen
returns to the Standby
Mode.
MENU
Enter the 4-digit security code.
The following screen is dis-
played for 2 seconds to con-
firm your selection. Then the
display returns to the Standby
Mode.