Toshiba e-STUDIO 170F - Manual (Page 23)

21
Place the recording paper
stack into the tray.
NOTES:
•
Do not exceed the upper
stack limit line as this may
cause paper mis-feeds.
• Do not add paper on top of
the paper already in the ma-
chine.
Adjust the Paper Guides to fit
the size of the Recording Pa-
per.
Push up the front plate of the
Recording Paper Tray to close
it.
Install the
Recording Paper 4
Replace the Bypass Tray.
CAUTION:
Do not place heavy objects
on the Document Exit Tray
or apply strong force.
Press:
MENU
+
+
+
+
The menu below displays:
Display the Paper
Size Menu 7
Recording Paper Installation (Recording Paper Tray) - continued
NOTE:
If you install legal size pa-
per but fail to select “3.LG”
at this point, the machine
will think letter size paper is
installed. False “Paper Jam”
failures will occur when the
legal size paper is fed into
the printer.
Adjust the Paper
Guides 5 Replace the Bypass
Tray 6 Select the Paper
Size 8
Select the paper size of the
Recording Paper Tray.
To select letter size, press:
To select A4 size, press:
To select legal size, press:
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
3.LG
2.A4
PAPER SIZE (TRAY 1)
1.LT
COMPLETED