Toshiba e-STUDIO 170F - Manual (Page 101)

99
Load the document face down
in the Document Support (see
page 82).
Adjust the resolution and con-
trast if desired (see pages 83
and 84).
Pick up the handset of the Ex-
ternal Telephone connected to
the “TEL” connector of the fac-
simile.
The External Telephone is con-
nected to the telephone line via
the facsimile, and the dial tone
is heard through the speaker of
the External Telephone.
The display on the facsimile
shows “EXTERNAL OFF
HOOK” on the LCD display.
Dial the facsimile number of
the remote party using the
keypad of the External Tele-
phone.
The entered number is immedi-
ately dialed. The number is
not displayed on the facsimi-
le’s LCD display.
NOTE:
When the External Tele-
phone is in the off-hook
status (i.e. while “EXTER-
NAL OFF HOOK” is dis-
played), the Dial Keypad on
the facsimile does not ac-
cept any key entry.
When you hear the answering
tone, press
START
on the
facsimile. If the remote party
answers the phone, you can
inform the remote party that
you wish to send a document.
Upon hearing the facsimile
tone, press:
START
Then replace the handset of
the External Telephone.
When the transmission is com-
pleted, the facsimile returns to
the Standby Mode.
This procedure may be useful
when you want to talk with a
remote party before sending a
document. A telephone set
must be connected to the
“TEL” connector. (This tele-
phone set is called the “Exter-
nal Telephone” in this manual.)
Direct Transmission - continued
External Off-hook Transmission (Transmission Using an External Telephone)
Load the Document 1 Dial on the External
Telephone 3 Press The START
Key 4 Pick Up the Handset of
the External Telephone 2
JAN-31 09:43 AM 100%
AUTO RECEIVE
EXTERNAL OFF HOOK
JAN-31 09:43 AM 100%
AUTO RECEIVE