Toshiba e-STUDIO 170F - Manual (Page 186)

184
Press:
+
+
+
+
+
+
Relay Originator Report Setting
Select the desired option to
print a report whenever a Relay
transmission is sent.
NOTE:
This is only applicable if the
e-STUDIO170F is used as
an Originator for a relay
transmission (see page
117).
To ALWAYS print a report
whenever a document is trans-
mitted, press:
To print a first page image of
the document on the transmis-
sion report, press:
Set the Option for
SHOW FIRST PAGE 3 Display the RELAY
ORIGINATOR Menu 1
COMPLETED
2.OFF
SHOW FIRST PAGE
1.ON
COMPLETED
Select the Option for RELAY ORIGINATOR 2
MENU
Go to next step.
Press
STOP
to complete this
setting.
To turn OFF Automatic printing
of reports, press:
To only print a report when an
error occurs, press:
The following screen is dis-
played for 2 seconds to confirm
your selection.
Press
STOP
to complete this
setting.
To not print a first page image
of the document on the trans-
mission report, press:
The following screen is dis-
played for 2 seconds to con-
firm your selection.
3.OFF
2.ON ERROR
RELAY ORIGINATOR
1.ALWAYS