Toshiba e-STUDIO 170F - Manual (Page 172)

170
Press:
+
+
+
+
Enter the time and day-of-
month to start the communica-
tion.
This function is available to
reserve a document for trans-
mission at a programmed
time.
This function is convenient for
making use of non-peak dis-
count telephone rates for do-
mestic and overseas facsimile
transmissions. Delayed com-
munication can be applied to
Single Transmissions (to
transmit a single document to
a specified destination), Multi-
address (Group) Transmis-
sions, Mail Box Transmis-
sions, Relay Transmissions,
and Polling Communications.
You can activate this option
while programming an Abbrevi-
ated Dial Number (page 65) or
One Touch Dial key setting
(page 71) if communication
with the remote party always
requires this option. Other-
wise, use the following proce-
dure.
Load the document face down
in the Document Support (see
page 82).
Adjust the resolution and con-
trast if desired (see pages 83
and 84).
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods.
• One Touch Key Dialing
... See page 89
• Abbreviated Dialing
... See page 90
• Alphabet Dialing
... See page 91
• Keypad Dialing
... See page 92
NOTES:
• If the day-of-month value
entered in Step 2 does not
exist in the current month,
the communication will
start on the first day of the
next month. For example,
if “30” is entered in Febru-
ary, the communication
will start on March 1st.
• If a time in the past is pro-
grammed, communication
will be performed in the
next month of the time.
Delayed Communication (Time Designation)
Load the Document 1 Enter the Time and
Date 3 Enter the Facsimile
Number 4 Display the
DELAYED COMM.
Menu 2
JAN-31 09:43 AM 100%
AUTO RECEIVE
DELAYED COMM.
[HH:MMAM DD]
JAN-31 09:43 AM 100%
ENTER TEL NUMBER
NOTE:
It is not necessary to input
a day-of-month, if you wish
the communication to be
completed within the next
24-hour period.
Simply leave the day-of-
month area blank.
MENU
(The cursor moves to the next
right digit as a numeric value is
entered on each digit. Use the
key to backspace and
delete the values of digits al-
ready entered.)
Change the AM/PM designa-
tion by pressing the following
keys. (for 12-hour format)
or
When the correct time and date
is entered, press:
MENU