Toshiba e-STUDIO 170F - Manual (Page 228)

226
SENSOR TEST
Select the SENSOR
TEST Menu 1
Press:
+
+
+
+
The sensor test checks if the
detection sensors operate nor-
mally.
The test items in SENSOR
TEST mode are as follows:
• Detection of Top Cover
open/closed status
• Detection of Front Cover
open/closed status
• Detection of Recording Pa-
per and Recording Paper
Tray presence/absence sta-
tus
NOTE:
When the sensor has bro-
ken, display does not
change next.
But about 40 seconds
passed, it will be set to NG.
Check the Top Cover 2
Open the Top Cover. When its
open state is detected, the
screen below appears. After
checking that the screen is dis-
played, close the Top Cover.
Detects the open state
of the Top Cover.
SENSOR TEST
OPEN TOP COVER
Close the Top
Cover
SENSOR TEST
OPEN FRONT COVER
SENSOR TEST
CLOSE TOP COVER
MENU
If no recording paper is placed
in the Recording Paper Tray,
the screen below is displayed.
You can resume the test by
loading the paper.
SENSOR TEST
PUT IN PAPER
Check the Front
Cover 3
Open the Front Cover. When
its open state is detected, the
screen below appears. After
checking that the screen is dis-
played, close the Front Cover.
Detects the open state
of the Front Cover.
Close the Front
Cover
SENSOR TEST
REMOVE PAPER
SENSOR TEST
CLOSE FRONT COVER