Toshiba e-STUDIO 170F - Manual (Page 217)

215
If the Document Scanner Unit
is dirty, your documents may
not be transmitted clearly. If
the Recording Unit is dirty, the
document you receive may not
be clear. In that case, clean
the Document Scanner Unit or
Recording Unit using the fol-
lowing procedures. You can
check these problems by mak-
ing a copy.
Examples of print problem:
Open the Operation Panel. Wipe the Glass surface and
the White Plate with a soft dry
cloth.
• If it is very dirty, wipe it with
a cloth soaked in water and
wrung out, then wipe it with
a dry cloth.
When the Recorded Image is not Clear...
Open the Operation
Panel 1 Wipe the Glass
Surface and White
Plate
2
Document Scanner Cleaning Procedure
Wipe the ADF Pad and Rollers
with a dry cloth.
• If it is very dirty, wipe it with
a cloth soaked in water and
wrung out, then wipe it with
a dry cloth.
CAUTION:
Be careful not to injure your
finger(s) on the ADF spring
when you wipe the ADF
pad.
Wipe the ADF Pad
and Rollers 3
If the problem occurs during
both a transmission and in
copy mode, check the Docu-
ment Scanner Unit.
If the problem occurs during
both receptions and copy
mode, check the Recording
Unit.