Toshiba e-STUDIO 170F - Manual (Page 145)

143
This function allows transmis-
sions only when the number
you dial matches the number
programmed in the remote fac-
simile. If the numbers do not
match, Security Transmission
prevents your facsimile from
sending by indicating a trans-
mission error.
NOTE:
The remote facsimile’s Ter-
minal ID (TTI) must be set
with the correct phone num-
ber. Otherwise, a transmis-
sion error will occur.
Select the desired option.
To set Security Transmission
to ON, press:
Press:
+
+
+
+
Default Setting for Security Transmission
Display the
SECURITY TX Menu 1 Select the Desired
Option 2
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
After completing this Configu-
ration Setting, you may con-
tinue to select other settings
referring to their associated
pages for instructions, or press
Select Another
SETUP Item, or ... 3
MENU
To set Security Transmission
to OFF, press:
to exit the Configuration Set-
ting mode and return to the
Standby Mode.
STOP
NOTE:
Telephone numbers are
verified by their last 5 digits.
1.ON
SECURITY TX
2.OFF
COMPLETED