Toshiba e-STUDIO 170F - Manual (Page 65)

63
Enter the desired number of
rings (1 to 10) before the fac-
simile will answer the incoming
call in Auto Receive mode.
When the desired ring count is
displayed on the LCD, press:
Enter the FAX Ring
Delay 3
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
Go to Step 6.
After completing this Configu-
ration Setting, you may con-
tinue to select other settings
referring to their associated
pages for instructions, or press
STOP
to exit the Configuration Set-
ting mode and return to the
Standby Mode.
Select Another
SETUP Item, or ... 6
Enter the desired Fax Monitor
Time (00 to 99 seconds). Dur-
ing this period, the facsimile
will monitor for the automatic
fax CNG signal. If detected,
the unit will switch to fax re-
ception when set for FAX/TAD
mode.
When the desired Fax monitor
time is displayed on the LCD,
press:
Enter the FAX
Monitor Time 4
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
Go to Step 6.
Enter the desired number of
pseudo rings (1 to 15) before
switching to facsimile reception
in TEL/FAX mode.
When the desired ring count is
displayed on the LCD, press:
Enter the Pseudo
Ring Delay 5
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
Go to Step 6.
Reception Mode Default Setting - continued
COMPLETED
COMPLETED
COMPLETED