Sending recovery transmission – Toshiba e-STUDIO 170F User Manual

Page 174

172

This operation is used to re-
send a document after the doc-
ument initially failed to be sent.
If recovery transmission is set
to ON, the document is stored
in the e-STUDIO170F for re-
sending.

NOTES:

• When the Recovery Trans-

mission is set to OFF, an
error tone and “NOT AL-
LOWED NOW” LCD
prompt result when Recov-
ery Transmission is se-
lected.
If there is no document
stored for recovery trans-
mission, an error tone
sounds and “NO ENTRY”
LCD prompt will be dis-
played.

• To change the default set-

ting of this function, refer
to page 145. The status
selection in this operation
will take precedence over
the default setting.

Press:

Enter the new facsimile num-
ber.

Sending Recovery Transmission

Select the Desired
Job

Change the
Facsimile Number

Display the
RECOVERY
TRANSMIT Menu

To start the transmission,
press:

Press:

Cancel the
Document

RECOVERY TX

[ENTER]:START

FILE NBR = 005

12345

2.CHANGE

JOB NUMBER 005

1.START

FAX NUMBER (MAX128)

[12345 ]

To cancel the document, go to
Step 4.

Press

view the jobs stored for resend-
ing. The information is dis-
played on the LCD display.

When the sending document to
be recovered was sent using
the One Touch key, Abbrevi-
ated Dial Number, Group Num-
ber, or Alphabet Dialing, press:

You can also change the num-
ber of the remote facsimile if
dialed from the Dial Keypad.
To re-transmit the document or
change the facsimile number,

press .

To change the number, press:

The transmission starts imme-
diately if the phone line is
available.

If the correct number is en-
tered, press:

JOB CANCEL

2.NO

DELETE JOB NUMBER005

1.YES