Toshiba e-STUDIO 170F - Manual (Page 68)

66
Abbreviated Dialer Registration - continued
To delete the contents stored
in the Abbreviated Dial Num-
ber, press:
(to DELETE)
To change the number or Lo-
cation ID (remote facsimile
name) currently assigned to an
existing Abbreviated Dial Num-
ber, press:
(to MODIFY)
The facsimile number currently
assigned is displayed on the
bottom row.
Skip to Step 6.
If you do not wish to change
the Abbreviated Dial Number
information, press:
(to RETAIN)
Return to Step 3 to select a dif-
ferent Abbreviated Dial Number
or press
STOP
to return to the
Standby Mode.
You can delete, modify, or re-
tain Abbreviated Dial Numbers
registered in this facsimile.
• DELETE
Deletes the information
stored in the selected Ab-
breviated Dial Number. It
will also remove the number
from all associated Group
Dialing Directories.
• MODIFY
Allows you to change the
remote facsimile number
and/or associated Location
ID name. This selection is
recommended if the location
is used in Group Dialing Di-
rectories.
• RETAIN
Retains the selected Abbre-
viated Dial Number informa-
tion without modification.
Change the ABB. Information 5
Delete the ABB. Dial
Information 5a Modify the ABB. Dial
Information 5b Retain the Current
ABB. Dial Information 5c
Then press:
Return to Step 3.
Enter the telephone number
you want to store (up to 128
digits).
Enter the Telephone
Number 6
FAX NUMBER (128MAX)
[XXXXX ]
ABB. NUMBER 001
ARE YOU SURE ?