Tektronix 560 - Manual (Page 57)

Installing Printer Software 3
User Manual 3-15
7. In the box marked Name of printer or print queue on that server , enter PS (for PostScript) in
uppercase, then click OK .
8. Click Close in the Printer Ports box.
9. In the Add Printer Wizard dialog box, click the box next to this new port; then click Next .
10. In the Add Printer Wizard dialog box, click Have Disk to add a new Tektronix driver.
11. Type in the path name (CD-ROM or diskette) to the driver files, then click OK .
12. Select the printer model and click Next .
13. If prompted that a driver is already installed for this printer, select Replace existing driver , then click
Next .
14. Type in the printer’s name (any name you want). Click the appropriate box to use this printer as the
default.
Click
Next .
15. Check one of the following options, then click Next :
Shared To share the printer on the network
(click on all platforms that may use this printer.)
Not shared If the printer is a local printer only
16. Select one of these options, then click Finish :
Yes Print a Test Page Recommended
No Do not print a Test Page
17. If you are using the printer’s CD-ROM, and you selected Shared in Step 15 , a message appears asking
for the location of printer files. Type in the CD-ROM drive followed by \PPDS95NT.DRV , and click
OK . Files are copied to your hard disk.
18. If you printed a Test Page, check if it printed; then click OK .