Printing: beyond the basics, Phaser 560 color laser printer, Color density samples – Tektronix 560 User Manual
Page 126: Card, Found inside the back cover pocket of the, Quick reference guide, Over the cyan column on the color reference page, Repeat steps, For each color
5
Printing: Beyond the Basics
5-4
Phaser 560 Color Laser Printer
7.
Compare the printer’s current density settings on the Color
Reference Page with the samples on the
Color Density Samples
card
(found inside the back cover pocket of the
Quick Reference Guide
).
a.
Place the Color Reference Page on at least two sheets of clean
white paper in a well-lighted area.
b.
Align the hole in the cyan color density sample on the
Color Density Samples
over the cyan column on the Color
Reference Page.
c.
Decide which block on the Color Reference Page most closely
matches the density of the cyan sample on the
Color Density
Samples.
Make a note of the value (–10 to +10) associated with
that block (you will need the value for Step
).
d.
Repeat Steps
b
and
c
for each color.
Color Density Samples
9698-79
Quick Reference
Phaser 560
R
Cyan
Magenta
Yellow
Black
Color Reference Page
-10
-8
-6
-4
-2
0
+2
+4
+6
+8
+10
-10
-8
-6
-4
-2
0
+2
+4
+6
+8
+10
-10
-8
-6
-4
-2
0
+2
+4
+6
+8
+10
-10
-8
-6
-4
-2
0
+2
+4
+6
+8
+10
Color Density Samples
9698-60