Tektronix 560 User Manual

Page 203

Troubleshooting

User Manual

7-31

Macintosh users

Note

If you are using QuickDraw GX and System Software 7.5, you
can download printer utilities from the Tektronix Phaser 560 GX
printer driver; refer to topics on the printer’s CD-ROM or the
Tektronix World Wide Web site for instructions.

Follow the instructions starting on page 3-16 to install the utility
files from either the printer’s CD-ROM or the Printer Software for
Macintosh diskette.

Select the appropriate printer in the

Chooser

Locate the

LaserWriter Utility

in the

PhaserTools

folder on your

computer’s hard disk, and double-click its icon to start the
application.

Choose

Download PostScript File

from the

Utilities

menu.

Select one of the following files from the list, then click

Open

(These files were installed in the

Phaser 560 Utilities

folder, inside

the

PhaserTools

folder.)

■

Select

Setscreen On

to enable setscreen operations.

■

Select

Setscreen Off

to disable setscreen operations.

At the prompt

Save PostScript output as:

you are asked

for a file name for saving printer output. Use either the default
name given in the edit box or type a new name.

Click

Save

to send the file to the printer.

If no output is returned by the printer, the

LaserWriter Utility

displays a dialog box; click

to continue.