Tektronix 560 - Manual (Page 134)

5 Printing: Beyond the Basics
5-12 Phaser 560 Color Laser Printer
3. Press the Menu button. The following message appears:
The asterisk (*) indicates the current setting. By default,
Check Print is enabled. Pressing an arrow button toggles the
selection between
enabled and disabled . Pressing the OK
button activates the new selection.
4. To change the Check Print Timeout (the amount of time the printer
pauses before completing the print job), press the
Menu button
when the front panel displays Check Print Timeout . The front
panel displays this message:
5. Press the arrow buttons to scroll through a list of pre-set timeouts:
1, 2, 5, 10, 20, 30 minutes, 1 hour, 8 hours, 24 hours, and Infinite.
The asterisk (*) indicates the current setting. Press
OK to activate
your selection.
9008-43
Exit
Check Print:enabled*
<---- -----> OK
9008-43
Exit
Check Print Timeout:5min*
<---- -----> OK