Tektronix 560 - Manual (Page 40)

2 Getting Set Up
2-22 Phaser 560 Color Laser Printer
Selecting a language for the front panel
By default, the front panel is set to display messages in English. If the Kanji
font SIMM is installed, front panel messages display, by default, in Japanese.
Use the printer’s front panel to change the default to any of these languages:
Spanish, French, German, Italian, English, or Japanese.
1. When the printer is on and the Ready message appears, press the
Menu button. You see this message:
Help Pages
<--- ---> Menu
Pressing the left arrow button ( <--- ) scrolls backward through the
selections; pressing the right arrow button ( ---> ) scrolls forward
through the selections; and Menu enters the currently displayed
menu.
2. Using the left ( <--- ) or right ( ---> ) arrow buttons, scroll through
the selections until you see this message:
Language
<--- ---> Menu
3. Press the Menu button to enter the language selection menu. You
see this message:
Language:English*
<--- ---> OK
where the asterisk ( * ) indicates the currently selected language.
4. Press the right arrow button until the display shows the language
you want from these selections:
Language:English
Language:Español
Language:Français
Language:Deutch
Language:Italiano
Language:(Japanese)
5. Press OK to select the language. Press the button until Ready
is displayed in the selected language.
Exit