Tektronix 560 - Manual (Page 36)

2 Getting Set Up
2-18 Phaser 560 Color Laser Printer
Connecting the printer
Printer ports
The printer is shipped with a SCSI port and parallel port on the printer’s rear
panel. Additionally, the printer can support one optional PhaserShare™
network card. All ports and network protocols are simultaneously active.
The printer accepts print jobs on a first-come, first-served basis.
Note See “Printer interface cables and adapters” on page 9-4 about
ordering cables for connecting the printer.
1. PhaserShare card ( optional) The printer accepts one of the
following:
■ PhaserShare Ethernet card supporting Novell NetWare, EtherTalk,
TCP/IP, Telnet and FTP protocols.
■ PhaserShare Token Ring card supporting Novell NetWare,
TokenTalk, TCP/IP, Telnet and FTP protocols.
■ PhaserShare LocalTalk/serial card.
The PhaserShare Network Cards and Software System Administrator
Manual contains all the information necessary for configuring and
using the optional network interfaces. Refer to “PhaserShare
network cards” on page 9-8 for ordering information.
9698-14
SCSI
2
3
1
Serial
PhaserShare™ LocalTalk/Serial Card
PhaserShare™ Token Ring Card
PhaserShare™ Ethernet Card
TX RX Link
10Base2
10Base-T
Parallel