Tektronix 560 - Manual (Page 42)

2 Getting Set Up
2-24 Phaser 560 Color Laser Printer
Setting the Energy Star Timeout
When the printer is idle for a predetermined amount of time, it enters
Energy Star mode, which reduces the power consumption and displays
Standby on the printer’s front panel. The printer resumes normal power
when it receives a signal, either from the front panel or a file being sent.
By default, the Energy Star mode is enabled and its timeout is set to 1 hour.
For normal office environments, it is recommended that you set the timeout
to 3 hours. To change this setting, follow these steps.
1. When the printer is on and the Ready message appears, press the
Menu button. You see this message:
Help Pages
<--- ---> Menu
2. Scroll through the selections until you see this message:
Printer Defaults
<--- ---> Menu
3. Press the Menu button.
4. Scroll through the selections until you see this message:
Energy Star Timeout
<--- ---> Menu
5. Press the Menu button. The screen displays this message:
Timeout:1 hrs *
<--- ---> OK
where the asterisk ( * ) indicates the currently selected timeout
value.
6. Press the right arrow button to increment the value, until the
display reads:
Timeout:3 hrs *
<--- ---> OK
7. Press OK to select the displayed value. Press the button until
Ready is displayed.
Exit