Tektronix 560 User Manual

Page 120

Printing Basics

4-56

Phaser 560 Color Laser Printer

Double-sided printing from the Multi-Purpose Feeder

Caution

Use laser bond paper for duplexing; two-sided printing on specialty
media can shorten component life. For opacity and feed reliability,
use laser paper that is at least 100 g/m

(28 lb. bond). For best

results, do not use heavy toner coverage on Side 1.

IDE

Place the paper in the Multi-Purpose Feeder with
the side to be printed

face up

. This example show

letterhead paper.

First, make these selections in the printer’s front
panel:

Default Tray:

Multi-Purpose

Listed in the

Printer Defaults

menu.

Media Type:

Paper

Listed under

Multi-Purpose Feeder

the

Printer Defaults

menu.

Note

For a multi-page document, print odd-numbered pages for Side 1.
(This selection is application-specific).

Then, make this selection in a supported driver and send the print
job:

Select the tray:

Multi-Purpose

Listed under

Paper Source

Tray

Tray*

Selection

(depending on the driver).

This setting automatically selects the media type previously defined in the front panel.

Remove the printed paper from the output tray.

32564-06

1 2 3 4 5 6 7