Tektronix 560 - Manual (Page 245)

Regulatory Information and Specifications 10
User Manual 10-5
MSDS for Toner
Section 1 – Product Identification
Trade NamesTektronix Part Number:
Black Toner Cartridge 016-1536-00
Cyan Toner Cartridge 016-1537-00
Magenta Toner Cartridge 016-1538-00
Yellow Toner Cartridge 016-1539-00
Product Use: Tektronix Phaser
®
560 printers
Section 2 – Information On Ingredients
Ingredients
Toners are a proprietary blend of pigments and resins, encased in a sturdy housing.
Section 3 – Hazards Identification
ROUTES OF EXPOSURE: Toner powders are encased in a cartridge housing and are not accessible, unless
cartridge is forcibly broken.
POTENTIAL HEALTH EFFECTS: Health effects from this product are expected to be very low, when product is used
as intended.
Immediate Effects:
Inhalation:
Minimum irritation to respiratory tract, as for any non-toxic dust.
Skin: Expected to be low hazard to skin, when used as intended.
Eye: May cause mild irritation.
I ngestion: Not an expected route of exposure.
Chronic Effects: None known or expected.
Section 4 – First Aid Measures
Inhalation: Unlikely route of exposure. In the event of exposure, remove person to fresh air. Seek medical attention if
symptoms occur.
Eyes: Contact unlikely. If any particles get into eye, flush thoroughly with water. Seek medical attention if symptoms
occur.
Skin: Wash thoroughly with water. Seek medical attention if symptoms of irritation occur.
Ingestion.: Seek medical attention immediately.
Section 5 – Fire Fighting Measures
Flammable Properties:
Flash Point: Not applicable.
Fire & Explosion Hazards: These toners will burn. No unusual hazards are expected.
Extinguishing media: CO
2
, dry chemical, foam, or water.
Section 6 – Accidental Release Measures
Spill Or Leak: Toners are encased in a sturdy housing. However, in case of breakage, toner powders may be cleaned
up with a broom or vacuum. Clean up residue if necessary with soap and water.
Section 7 – Handling And Storage
Handling: None.
Storage: Avoid high temperatures.