FUJITSU SPARC M4000 - Manual (Page 93)

Chapter 2 Setting Up XSCF 2-37
Note – PEM: Abbreviation for Privacy Enhanced Mail. Mail to be sent is encrypted
for increased privacy.
Enabling or Disabling the LDAP Server
■
Command operation
1. Use the showlookup (8) command to display the lookup method of
authentication and user privileges.
XSCF> showlookup
Privileges lookup: Local only
Authentication lookup: Local and LDAP
Certificate
chain Imports the certificate chain of an LDAP server.
Import a certificate chain as follows:
• Import a secure copy (scp) from a remote file.
• Establish a connection to the target LDAP
server, and import the certificate chain from
the server.
setldap • The certificate chain must
be in PEM format. (Note 1)
• A password may need to
be entered to import an scp
from a remote file.
LDAP
server/port Specify the IP addresses and port numbers of
the primary and secondary LDAP servers.
Specify IP addresses or host names for the
addresses.
(e.g. ldap://foobar.east,
ldaps://10.8.31.14:636 ) setldap • The default LDAP port
number is 636 for ldaps,
389 for ldap when the port
number is not specified.
• If LDAP server name is
specified, the server name
maximum length is 128
characters
Timeout Sets the maximum time (seconds) allowed for
an LDAP search. setldap
LDAP test Tests the connection to an LDAP server. setldap
TABLE 2-6 LDAP Administration (Continued)
Item Description Shell command Remarks