FUJITSU SPARC M4000 - Manual (Page 242)

5-6 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
showpowerupdelay Displays the warm-up time and the air-conditioning wait time settings.
setshutdowndelay Sets the UPS shutdown delay time at power failure.
showshutdowndelay Displays the UPS shutdown delay time at power failure.
setdualpowerfeed Sets the dual power feed.
showdualpowerfeed Displays the dual power feed.
setlocator Enables or disables the CHECK LED blinking.
showlocator Displays the LED status.
switchscf Switches the XSCF Unit state (Active/Standby).
ioxadm Configures the External I/O Expansion Unit (IOBOX).
Displays the External I/O Expansion Unit settings.
clockboard Sets/Displays the number of clock unit (CLKU) used when the next platform is
powered on.
setdomparam Rewrites the OpenBoot PROM environment variable that is compulsory.
getflashimage Gets the firmware update program.
flashupdate Updates the firmware program.
version Displays the comprehensive firmware (XCP) version.
Displays the XSCF firmware version.
Displays the OpenBoot PROM firmware version.
prtfru Displays the FRU-ROM data.
snapshot Saves log information to the specified destination.
showmonitorlog Displays the XSCF monitoring messages on console in real time.
showlogs Displays an error log, power log, event log, console log, panic log, IPL log,
temperature/humidity log, and monitoring message log.
fmadm Monitors or controls the Fault Management Diagnosis Engines (FMDE).
fmdump Dumps the fault event log containing FM diagnosis results.
fmstat Displays the FMDE status.
unlockmaintenance Forcibly release the locked status of the XSCF.
rebootxscf Resets the XSCF.
who Displays users who login to the XSCF.
man Displays the man page of the specified command.
exit Ends the XSCF Shell.
TABLE 5-1 XSCF Commands (Continued)
Command Description