FUJITSU SPARC M4000 - Manual (Page 214)

4-6 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
4.2 Display Domain Information
This section describes methods for checking the configuration and status of a
domain.
Note – For details on domain management, configuration and each command, see
Chapter 2 , the XSCF Reference Manual, or the Administration Guide.
Commands Used to Display Domain Information
Execute the following commands individually, as appropriate. For details of
commands, see
Chapter 5 .
■ showdcl
■ showboards
■ showdomainstatus
■ version
4.2.1 Domain Information
■ Command operation
1. Use the showdcl (8) command to check the domain ID, LSB number,
configuration policy, No memory state (true/false), No IO state (true/false),
floating board state, and degradation information.
XSCF> showdcl -va
DID LSB XSB Status No-Mem No-IO Float Cfg-policy
00 Running FRU
00 00-0 False False False
01 -
02 -
03 -
04 01-0 False True False
05 -
:
15 -