FUJITSU SPARC M4000 - Manual (Page 307)

Chapter 9 How to Use the XSCF Web 9-13
System and Domain Operation
TABLE 9-6 lists the function used for the system as a whole and individual domains.
Select [Operation]-[Domain Operation]-[Domain Power] in the Menu tree.
TABLE 9-6 System and Domain Operation
Function Remarks
System power on/off Specifies the system power on/off.
This function is equivalent to the poweron (8) /
poweroff
(8) commands.
Domain power-on/off Specifies the domain power on/off.
This function is equivalent to the poweron (8) /
poweroff
(8) commands.
Reset System reset, XIR reset and panic for the domain are
performed. This function is equivalent to the reset (8)
command.
Send break Specifies the send break.
This function is equivalent to the sendbreak (8)
command.
TABLE 9-7 lists the functions used for specifying each domain mode. Select
[Operation]-[Domain Operation]-[Domain Mode Configuration] in the Menu tree.
TABLE 9-7 Domain Mode Configuration
Function Remarks
Domain mode configuration Suppresses the send break, Alive check, and
automatic boot functions. Also, display the domain
mode status.
This function is equivalent to the setdomainmode
(8) and showdomainmode (8) commands.