FUJITSU SPARC M4000 - Manual (Page 131)

Chapter 2 Setting Up XSCF 2-75
SNMPv1/
SNMPv2c
communication
Enables/disables SNMPv1 and SNMPv2c
communication. setsnmp The community string
used to enable
SNMPv1/SNMPv2c is
Read-Only.
SNMPv3 trap Makes the following SNMPv3 trap settings:
• User name (Note 1)
• Authentication password (Note 1)
• Encryption password (Note 1)
• Engine ID of local agent or request of an
acknowledgement from the receiving host.
• Port number of the trap destination
• Host name of the trap destination
setsnmp • Must start with 0x, but
also consist of an even
number of hexadecimal
digits.
• One of the following two
authentication
algorithms is selected:
MD5, Secure Hash
Algorithm (SHA)
• The default values of the
trap destination host are
to be defined.
• The default port number
of the trap destination is
162.
SNMPv1/
SNMPv2c Trap
Makes the following SNMPv1 and SNMPv2c
trap settings:
• Trap type setting
• Community string
• Port number of the trap destination
• Host name of the trap destination setsnmp • One of the following
three trap types is
selected: v1, v2, inform
(Note 2)
• The default port number
of the trap destination is
162.
Disable
SNMPv3 trap Disables trap sending to the target host, with
the following specified:
• User name
• Trap destination host setsnmp
Disable
SNMPv1/
SNMPv2c trap
Disables trap sending to the target host, with
the following specified:
• Defined protocol type (v1/v2c)
• Trap destination host setsnmp
Display USM
management
information Displays the USM management information
for the SNMP agent showsnmpusm
TABLE 2-17 SNMP Administration (Continued)
Item Description Shell Command Remarks