FUJITSU SPARC M4000 User Manual

Page 245

Chapter 5 Overview of the XSCF Shell

5-9

When the SSH connection is done using a user key, install the user public key in
XSCF in advance. See

for instructions on how to install the user public

key.

The following example shows a login using a user public key:

[client]# ssh [email protected]

Enter passphrase for key ‘/home/nana/.ssh/id_rsa’:

xxxxxxx

Warning: No xauth data; using fake authentication data for X11

forwarding.

Last login: Mon Sep 1 10:19:37 2006 from client

XSCF>

5.2.4

Operation For Connecting Via the XSCF-LAN
(Telnet)

This section describes how to log in to XSCF via an XSCF-LAN (telnet) connection.

1. Enter the IP address or host name of XSCF and port number 23, and use telnet

via XSCF-LAN.

2. Enter a user account and password from the XSCF console.

3. Enter XSCF commands at the shell prompt (XSCF>) that is displayed after you