FUJITSU SPARC M4000 - Manual (Page 105)

Chapter 2 Setting Up XSCF 2-49
SSH Client
In this system, you can use the following SSH clients.
■ Solaris Secure Shell
■ OpenSSH
■ PuTTY
■ UTF-8 TeraTerm Pro with TTSSH2
Please refer to each software manual for command usage instructions.
TABLE 2-9 lists setting items and the corresponding shell commands.
TABLE 2-9 SSH/Telnet Administration
Item Description Shell command Remarks
Display SSH
setting
information Displays SSH settings.
Information on whether SSH is enabled or
disabled, the host key, fingerprint, and your
user public key is displayed. showssh The SSH port number is
22.
When the user public key
is displayed with a user
name, the useradm
privilege is required.
Enable/
disable SSH Enables or disables SSH. setssh The SSH is disabled by
default. (Note)
Host key Generates an SSH2 host key (RSA key and
DSA key). setssh When the SSH is enabled
first, the host key is
generated.
Display
telnet setting
information Displays telnet settings.
The displayed telnet settings include
information indicating whether telnet is
enabled or disabled. showtelnet The telnet port number is
23.
Enable/
disable telnet
Enables or disables telnet. settelnet The telnet is disabled by
default.