FUJITSU SPARC M4000 - Manual (Page 310)

9-16 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
Setting System
TABLE 9-10 lists the functions for Network configuration of XSCF. Select [Settings]-
[Network] in the Menu tree.
TABLE 9-10 Network Configuration
Function Remarks
XSCF network information and status display Displays the XSCF network information and status.
This function is equivalent to the shownetwork (8)
and showhostname (8) commands.
XSCF network configuration and display Sets each IP address, host name, domain name,
netmask, and enabling/disabling of the XSCF
network interface.
This function is equivalent to the setnetwork (8)
and sethostname (8) commands.
The DSCP link address is displayed as the PPP
connection interface. However, the DSCP link
address cannot be set through the XSCF Web. Set
the address by using the setdscp (8) command.
Route display and configuration Displays and configures the routing.
This function is equivalent to the showroute (8)
and setroute (8) commands.
DNS server display and configuration Dispalys and configures the nameserver.
This function is equivalent to the
shownameserver
(8) and setroute (8)
commands.
Apply network settings Applies the network settings. After saving the
settings, to complete the settings, XSCF reset is
required.
This function is equivalent to the applynetwork
(8) and rebootxscf (8) commands.