FUJITSU SPARC M4000 - Manual (Page 269)

Chapter 7 XSCF SNMP Agent Function 7-9
■
Community name
■
Port number of the trap destination
■
Host name of the trap destination
■ Step 3:
Enable the XSCF SNMP agent function. Enable one or both of the following,
according to the user environment:
■ SNMPv1 and SNMPv2c
■
SNMPv3
Note – All MIB information except the setting items in step 2 is initialized when the
XSCF SNMP agent function is enabled.
Caution – IMPORTANT - Since SNMPv1 and SNMPv2c do not provide a
capability to encrypt communication data, neither are secure enough. In SNMPv3,
more secure transmission can be achieved through authentication and encryption
settings on both the agent and manager sides. The server uses SNMPv3 as the
default SNMP agent.
Suspending or Disabling Transmission
[Disabling the XSCF SNMP agent function]
Disable one or both of the following, according to the user environment:
■
SNMPv1 and SNMPv2c
■
SNMPv3
[Disabling sending to the target trap destination host for SNMPv3]
Specify the following to disable sending:
■
User name
■
Trap destination host
[Disabling sending to the target trap destination host for SNMPv1, SNMPv2c]
Specify the following to disable sending:
■
Defined protocol type (v1/v2c)
■
Trap destination host