Table 2-22, Dcl information – FUJITSU SPARC M4000 User Manual
Page 147
Chapter 2 Setting Up XSCF
2-91
Note –
The PSB number is same as the CMU / I/O unit slot number.
Note –
If a PSB has one XSB number, the Uni-XSB configuration is assumed; and if
it has four XSB numbers, the Quad-XSB configuration is assumed.
lists DCL information. The DCL has descriptors that each specify one item
of LSB information. Up to 16 items of LSB information (on the DCL) can be set for
one domain. These items can be displayed and specified by showdcl (8), and
setdcl
(8). For details on DCL terms, see
.
TABLE 2-22
DCL Information
DCL Item
Setting Details and Notes
Domain ID
Local domain number.
LSB number
LSB number.
XSB number
XSB number assigned to an LSB.
The same XSB number cannot be assigned to another LSB in the same domain. (Note)
no-mem (Omit-
memory option)
True : Memory cannot be used.
False : Memory can be used (default).
no-io (Omit-I/O
option)
True : Does not add I/O.
False : Adds I/O (default).
Floating Board
True : Selects a Floating Board.
False : Does not select a Floating Board (default).
Configuration policy
FRU : Removal in units of FRU components. (Default) (Note)
XSB : Removal in XSB units
System : Removal of a domain (domain deactivated)
Domain status
Display domain status as follows.
Powered Off: Power off state.
Initialization Phase: State that POST is proceeding or initializing is started by
OpenBoot PROM.
OpenBoot Executing Completed: State that initializing is completed by OpenBoot
PROM
Booting/OpenBoot PROM prompt: The OS is booting. Or due to the domain shutdown
or reset, the system is in the OpenBoot PROM running state, or is suspended in the
OpenBoot PROM (ok prompt) state.
Running: State that OS is running.
Shutdown Started: State that the power off is started.
Panic State: State that panic is occurred and reset is not started.