FUJITSU SPARC M4000 - Manual (Page 300)

9-6 SPARC Enterprise Mx000 Servers XSCF User’s Guide • April 2008
9.2.1 Prerequisites
Some settings are disabled in the initial settings of the XSCF Web. To use this
function, advance configuration is required as follows:
■ Create an XSCF user account.
■ Set the IP address of a client terminal.
■ Enable https at the https setting to use the XSCF Web.
■ Register the web server certificate at the https setting.
■ Specify mail notification (recommended for failure notification).
For details on the settings, see Chapter 2 .
9.2.2 Supported Browsers
TABLE 9-2 lists the web browsers supported by the XSCF Web. To use functions in
any of the following web browsers, enable the appropriate settings.
TABLE 9-2 Supported Browsers
Browser Version
Netscape Navigator (TM) 7.1 and later
Microsoft (R) Internet Explorer 6.0 and later
Firefox (Solaris 10) 2.0 and later
9.2.3 Functions to be Enabled on the Browser
The following functions are necessary for the browser.
1. Secure Socket Layer Protocol (SSL) Ver. 3,
Transport Layer Security (TLS) Ver. 1
2. JavaScript™ enabled
3. Cookies enabled for session management