beautypg.com

Lenovo ThinkServer RD650 User Manual

Page 62

background image

11. Reinstall any parts and reconnect any cables. Then, reinstall the server cover. See “Completing the

parts replacement” on page 183.

12. Connect the server to an ac power source and turn on the server.

2

Clear password jumper

Used to erase forgotten passwords, such as the BIOS passwords.

To clear passwords, do the following:

1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

2. Prepare your server. See “Removing or extending the server from the rack cabinet” on page 69.

3. Remove the server cover. See “Removing the server cover” on page 69.

4. Locate the clear password jumper

2

on the system board. Then, remove any parts and disconnect any

cables that might impede your access to the jumper.

5. Remove the jumper cap from the jumper cap storage

4

.

6. Note the orientation of the jumper cap and then install the jumper cap on the clear password jumper.

7. Reinstall any parts and reconnect any cables. Then, reinstall the server cover. See “Completing the

parts replacement” on page 183.

8. Connect the server to an ac power source and wait for several minutes. Then, turn on the server. The

BIOS passwords are erased, including the administrator password and user password.

9. Repeat step 1 through step 3.

10. Move the jumper cap back to the jumper cap storage

4

.

11. Reinstall any parts and reconnect any cables. Then, reinstall the server cover. See “Completing the

parts replacement” on page 183.

12. Connect the server to an ac power source and turn on the server.

13. To set new passwords, see “Using passwords” on page 58.

3

BIOS recovery jumper

Used to recover the BIOS if the power to your server is interrupted while the BIOS is being updated and your
server cannot start correctly.

To recover the BIOS, see “Recovering from a BIOS update failure” on page 61.

4

Jumper cap storage

Used to store the jumper cap. A jumper cap is encased on the pins by default.

48

ThinkServer RD650 User Guide and Hardware Maintenance Manual