Updating the server configuration – Lenovo ThinkServer RD650 User Manual
Page 200
Note: In most areas of the world, Lenovo requires the return of the defective CRU. Information about this will
come with the CRU or will come a few days after the CRU arrives.
Updating the server configuration
When you turn on the server for the first time after you install, remove, or replace a device, you might
need to update the server configuration.
Some optional devices have device drivers that you must install. For information about installing device
drivers, use the documentation that comes with each optional device. To obtain the supported device
drivers for your server from the Lenovo Support Web site, go to and follow
the instructions on the Web page to find and download the device drivers you need.
Refer to the following information resources to update the server configuration:
• To update the BIOS configuration, see “Using the Setup Utility program” on page 55.
• To update the RAID configuration, see “Configuring RAID” on page 62.
• To update your system firmware, see “Updating the firmware” on page 65.
• To use the Lenovo ThinkServer Deployment Manager program, see “Lenovo ThinkServer Deployment
186
ThinkServer RD650 User Guide and Hardware Maintenance Manual