Installing or removing the flash module – Lenovo ThinkServer RD650 User Manual
Page 117
8. Tighten the two screws to secure the AnyRAID adapter or the pass-through board.
Figure 77. Tightening the screws
9. If you are instructed to return the old AnyRAID adapter or the pass-through board, follow all packaging
instructions and use any packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to “Completing the parts replacement” on page 183.
Installing or removing the flash module
This topic applies only to AnyRAID adapters that support the flash module.
The flash module works as the cache memory of the installed AnyRAID adapter. You can purchase a flash
module from Lenovo.
For a list of ThinkServer options, go to:
Installing the flash module
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 67.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• Use any documentation that comes with the flash module and follow those instructions in addition to
the instructions in this topic.
.
103