Yaskawa MP2300S Basic Module - Manual (Page 75)

2.2 Basic Module
2.2.6 SVR Virtual Motion Module
2-49
Specifications and Functions
( 2 ) Example SVR Usage
The SVR is used in the following two applications.
• Program testing: Results are easily obtained without mounting a motor.
• Generating commands: If the SVR is used in applications where motion modules are required only for gen-
erating commands, such as master axis for phase control or multi-axis synchronous control, then Motion Mod-
ules on real axes are no longer required.
The following table lists application examples of the SVR.
ΠThe software limit function and machine lock function cannot be used with the SVR. The position error will always be
0.
( 3 ) System Configuration Example
The following figure shows an example system configuration using SVR.
Slot
Number
Application Example Application Method
1 Master axis for phase control
Electronic cam or shaft operation can be achieved by using the SVR for the virtual
master axis.
2
Multi-axis synchronous con-
trol
Multi-axis synchronous control can be achieved by controlling the SVR from a
motion program and then using the ladder program to copy position commands of the
SVR to other axes.
3 Sine curve commands
If the motion program is used to perform circular interpolation with the SVR, the axis
will operate with a sine curve command.
Motion
Parameter
Virtual Servo axes
MP2300S
Motion
Parameter
Motion
Parameter
Optional modules
Ladder program
Motion program
High-speed scan
High-speed scan
MECHA
TROLINK
MECHA
TROLINK
SERVOPACK
YASKAWA SERVOPACK 200V
SGDS-01A12A
SW1
CHARGE
C
N
3
A/B
C
N
1
C
N
2
C
N
4
L1
L2
L2C
L1C
B1/
B2
U
V
W
C
N
6
Servomotor
SERVOPACK
YASKAWA SERVOPACK 200V
SGDS-01A12A
SW1
CHARGE
C
N
3
A/B
C
N
1
C
N
2
C
N
4
L1
L2
L2C
L1C
B1/
B2
U
V
W
C
N
6
Servomotor
Real Se
rvo axes
Virtual motion
module (SVR)
High-speed scan
Motion module
(Built-in SVB)
High-speed scan
Motion module
(SVB-01)
C P U