Yaskawa MP2300S Basic Module - Manual (Page 10)

x
„
Maintenance and Inspection Precautions
„
Disposal Precautions
„
General Precautions
ΠDo not attempt to disassemble the MP2300S.
There is a risk of electrical shock or injury.
ΠDo not change wiring while power is being supplied.
There is a risk of electrical shock or injury.
ΠWhen replacing the MP2300S, restart operation only after transferring the programs and parameters from
the old Module to the new Module.
There is a risk of device damage.
ΠDispose of the MP2300S as general industrial waste.
ΠA lithium battery is built into the MP2300S. After replacing the battery, dispose of the old battery separate
from regular waste and in accordance with local regulations.
Observe the following general precautions
to ensure safe application.
ΠThe products shown in illustrations in this manual are sometimes shown without covers or protective
guards. Always replace the cover or protective guard as specified first, and then operate the products in
accordance with the manual.
ΠThe drawings presented in this manual are typical examples and may not match the product you
received.
ΠIf the manual must be ordered due to loss or damage, inform your nearest Yaskawa representative or
one of the offices listed on the back of this manual.
CAUTION
CAUTION