Yaskawa MP2300S Basic Module - Manual (Page 228)

6.2 Communication with Other MP Series
6.2.3 When the MP2300S Acts as Master (I/O message communication function is used)
6-39
Built-in Ethernet Communications
4.
Set a communication setting in the I/O Message Communication Easy Setting Window.
„
How to set up in the I/O Message Communication Easy Setting Window
c Set Port No. of the MP2300S side (“10005, 10006,” X for example).
d Select Extended MEMOBUS for Communication Protocol Type, and click the Default Button.
„ Caution
When the communication protocol is Extended MEMOBUS, the register type that can select both read and write is fixed at the
Holding Register (MW).
e Select Connect Type (TCP, for example).
f Select Code (BIN, for example).
g Set Remote IP Address for the other device (MP2300) to be connected (“192.168.001.002,” for example).
h Set Port No. of the other device (MP2300) to be connected (“10005, 10006,” for example).
„ Caution
In I/O message communication, as a message is transmitted from each port number for register read/write, a connected remote
device needs the message receive functions to receive two messages.
f g h
ik j c l h
c d e