Yaskawa MP2300S Basic Module - Manual (Page 120)

4.2 Preparation (step 1)
4.2.1 Wiring
4-4
[ a ] Required Equipment
„ Caution
• Install MPE720 Ver.6 in the personal computer before starting step 1.
For information on its installation, refer to Engineering Tool for MP2000 series Machine Controller MPE720 Version 6 Users
Manual (manual number: SIEP C880700 30).
• Set the PC Ethernet port in advance. For information on the setup, refer to Appendix F Simple Connection Function of the
Engineering Tool.
• The SERVOPACK station number (SW1) is set to 1 and 2.
• In a 1:1 connection without HUB, use a cross cable as a LAN cable.
Product Name Model Q’ty
MP2300S JEPMC-MP2300S-E 1
MECHATROLINK cable (0.5m) JEPMC-W6002-A5 2
Terminator (terminating resistor) JEPMC-W6022 2
Σ-III SERVOPACK SGDS-A5F12A 2
Σ-III servomotor SGMAS-A5A2A21 2
Motor cable (3m) JZSP-CSM01-03 2
Encoder cable (3m) JZSP-CSP05-03 2
HUB (commercial product) LSW-TX-8EP 1
MPE720 Ver.6 CPMC-MPE770 1
LAN cable (for Ethernet connection) Commercial straight cable 2
Personal computer (main unit) Commercial product 1
24-VDC Current capacity of power supply 2A or more 1