Yaskawa MP2300S Basic Module - Manual (Page 406)

Appendix G MSG-SND/MSG-RCV Functions (Ethernet)
G.1 Message Transmit Function (MSG-SND)
A-84
Example: When reading coil state with offset:
The various setting values and their relationships with the data of the remote device are as follows, when transmitting
“reading coil state” with offset in MEMOBUS protocol:
• Description of the MSG-SND function in ladder program
• Parameter list setting of the MSG-SND function
Note: IN: Input, OUT: Output, SYS: For system use
Table G.19 Parameter List Setting
Register Num-
ber
Setting
Value
Parameter Num-
ber
IN/OUT Remarks
DW00000 – PARAM00 OUT Process result
DW00001 – PARAM01 OUT Status
DW00002 00001 PARAM02 IN Connection number=1
DW00003 – PARAM03 IN Option (setting unnecessary)
DW00004 00001 PARAM04 IN Function code=1 (reads coil state)
DW00005 08192 PARAM05 IN Data address=8192 bits (512 words)
DW00006 00100 PARAM06 IN Data size=100
DW00007 00001 PARAM07 IN Remote CPU number=1
DW00008 01000 PARAM08 IN Coil offset=1000 words
DW00009 00000 PARAM09 IN Input relay offset=0 word
DW00010 00000 PARAM10 IN Input register offset=0 word
DW00011 00000 PARAM11 IN Holding register offset=0 word
DW00012 – PARAM12 SYS Reserved (zero clear at startup)
DW00013 – PARAM13 SYS Reserved
DW00014 – PARAM14 SYS Reserved
DW00015 – PARAM15 SYS Reserved
DW00016 – PARAM16 SYS Reserved
Execute
Communication device = 218IFA
Protocol = MEMOBUS
Circuit number = 1
Communication buffer channel number = 1
Parameter list start address
(use DW00000 to DW00016)
Abort
Dev-Typ
Pro-Typ
Cir-No
Ch-No
Param
MSG-SND
Busy
Complete
Error
DB000201
DB000202
00016
00001
00001
DA00000
00001
DB000210
DB000211
DB000212