Yaskawa MP2300S Basic Module - Manual (Page 327)

Appendix A System Registers Lists
A.1 System Service Registers
A-5
Appendices
( 4 ) Scan Execution Status and Calendar
( 5 ) Program Software Numbers and Remaining Program Memory Capacity
2.0-s Sampling Relay SB000036
60.0-s Sampling Relay SB000037
1.0 s After Start of Scan Relay SB000038
2.0 s After Start of Scan Relay SB000039
5.0 s After Start of Scan Relay SB00003A
(cont’d)
Name Register No. Remarks
1 scan
2.0s 2.0s
1 scan
60.0s 60.0s
1.0s
2.0s
5.0s
Name Register No. Remarks
High-speed Scan Set Value SW00004 High-speed Scan Set Value (0.1 ms)
High-speed Scan Current Value SW00005 High-speed Scan Current Value (0.1 ms)
High-speed Scan Maximum Value SW00006 High-speed Scan Maximum Value (0.1 ms)
High-speed Scan Set Value 2 SW00007 High-speed Scan Set Value (1 μs)
High-speed Scan Current Value 2 SW00008 High-speed Scan Current Value (1 μs)
High-speed Scan Maximum Value 2 SW00009 High-speed Scan Maximum Value (1 μs)
Low-speed Scan Set Value SW00010 Low-speed Scan Set Value (0.1 ms)
Low-speed Scan Current Value SW00011 Low-speed Scan Current Value (0.1 ms)
Low-speed Scan Maximum Value SW00012 Low-speed Scan Maximum Value (0.1 ms)
Reserved by the system. SW00013 (Not used)
Executing Scan Current Value SW00014 Executing Scan Current Value (0.1 ms)
Calendar: Year SW00015 1999: 0099 (BCD) (Last two digits only)
Calendar: Month Day SW00016 December 31: 1231 (BCD)
Calendar: Hours Minutes SW00017 23 hours 59 minutes: 2359 (BCD)
Calendar: Seconds SW00018 59 s: 59 (BCD)
Calendar: Day of Week SW00019
0: Sun., 1: Mon., 2: Tues., 3: Wed., 4: Thurs., 5: Fri.,
6: Sat.
Name Register No. Remarks
System Program Software Number SW00020 S†††† (†††† is stored as BCD)
System Number
SW00021
to
SW00025
(Not used)
Remaining Program Memory Capacity SL00026 Bytes
Total Memory Capacity SL00028 Bytes