A-109, 1 ) message receive function setting – Yaskawa MP2300S Basic Module User Manual

Page 431

Appendix G MSG-SND/MSG-RCV Functions (Ethernet)

G.2 Message Receive Function (MSG-RCV)

A-109

Appendices

G.2.7 Function Setting and Parameter Details for Non-procedural Protocol

This section explains the MSG-RCV function setting and its parameter list details when non-procedure is used as a pro-
tocol.

Note: Non-procedure communication protocol stores the received data in the M register intact without a proto-

col conversion.
You can receive any protocol in accordance with the remote device.

( 1 ) Message Receive Function Setting

[ a ] 218IFA Setting Example

An example of a function setting when 218IFA is used as a transmission device follows:
When non-procedure 2 (per byte) is used, set the Pro-Typ field to “00003”. (non-procedure 1 (per word))
Set the circuit number in accordance with the circuit number allocated to the target 218IFA.
Set a unique communication buffer channel number for the same circuit.
For information on the register number, refer to G.2.2 ( 1 ) Input Item and G.2.2 ( 2 ) Output Item.

[ b ] 218IF Setting Example

An example of a function setting when 218IF is used as a communication device follows:
When non-procedure 2 (per byte) is used, set the Pro-Typ field to “00003”. (non-procedure 1 (per word))
Set the circuit number in accordance with the circuit number allocated to the target 218IF.
Set a unique communication buffer channel number for the same circuit.
For information on the register number, refer to G.2.2 ( 1 ) Input Item and G.2.2 ( 2 ) Output Item.

Execute

Abort

Dev-Typ
Pro-Typ

Cir-No
Ch-No
Param

MSG-RCV

Busy
Complete

Error

DB000201
DB000202
00016
00001
00001

DA00000

00001

DB000210
DB000211

DB000212

Communication device = 218IFA

Protocol = non-procedure 1

Circuit number = 1

Communication buffer channel number = 1

Parameter list start address = DA00000

(use DW00000 to DW00016)