Yaskawa MP2300S Basic Module - Manual (Page 371)

Appendix F Simple Connection Function of the Engineering Tool
F.2 Procedure
A-49
Appendices
8.
Select Ethernet (LP) (IP:192.168.1.2) as the communication port.
Personal computer IP address
Note: You can check in advance the personal computer IP address in the control panel.
„ Difference between Ethernet (LP) and Ethernet
The LP of Ethernet (LP) is short for “Long packet.” Compared with Ethernet, Ethernet (LP) transmits and receives larger pack-
ets at one time, resulting in high-speed data transfer. Available communication ports may differ depending on the module of the
connected controller. Select the communication port according to the table below.
„ When there are multiple LAN ports on the personal computer
If there are multiple LAN ports on the personal computer, multiple IP addresses will be shown in the communication port.
Select the IP address of the LAN port to which the cable is connected.
„ Controller search function
When Ethernet is selected in the communication port, the controller search function will be unavailable.
9.
Click the Search Button.
A controller search list will appear.
Module of the Connected
Controller Side
Name
Communication Port to Be
Selected in MPE720
218IF-01 218IF Ethernet
218IF-02 218IFB
Ethernet (LP)
MP2300S Built-in Ethernet 218IFA