beautypg.com

1 sva-01 module operation mode selection – Yaskawa JAPMC-MC2300 User Manual

Page 62

background image

4.1 SVA-01 Module Operation Mode Selection

4-2

4.1 SVA-01 Module Operation Mode Selection

With the SVA-01, one of the following three operation modes can be selected.

• Normal Operation Mode
• Simulation Mode
• General I/O Mode

Select an operation mode by setting the fixed parameter No. 0 (Selection of Operation Modes) in the Fixed Parameter

Tab Page of SVA Definition Window.

Refer to 3.3.1 Opening the SVA Definition Window on page 3-7 for information on how to open the SVA Definition
Window.

Fixed Parameter

Name

Setting

Default Setting

No. 0

Selection of Operation
Modes

0: Normal operation mode
1: Axis unused
2: Simulation mode
4: General-purpose I/O mode
5: System reserved mode 1
6: System reserved mode 2

1: Axis unused

See also other documents in the category Yaskawa Equipment: