beautypg.com

Yaskawa JAPMC-MC2300 User Manual

Page 60

background image

3.5 SERVOPACK Reference Offset Adjustment

3.5.2 Manual Servo Tuning of the Speed Reference Offset

3-15

3

Setup

3.

Press the DATA/ Key for a minimum of one second.

"= SPd" will be displayed. The manual servo tuning mode for the speed reference offset will be entered.

4.

Press the DATA/ Key for less than one second to display the speed reference offset amount.

5.

Enter the offset amount by pressing the (UP) or (DOWN) Key.

6.

Press the DATA/ Key for less than one second. The display shown on the left in the figure below will
appear and then will change to “donE” in a instant. The offset amount is set.

7.

Press the DATA/ Key for a minimum of one second to return to the utility function mode.

The display will return to "Fn00A".

See also other documents in the category Yaskawa Equipment: