Yaskawa MP930 - Manual (Page 335)

E.2 System Service Registers
E -3
E.2 System Service Registers
J
Registers Common to All Drawings
Name Register Number Remarks
First scan (high-speed) SB000001 ON for only the first scan after high-speed scan
is started.
First scan (low-speed) SB000003 ON for only the first scan after low-speed scan
is started.
Always ON SB000004 −
J Registers Specific to DWG.H
These registers are set when HSCAN starts.
Name Register Number Remarks
1-scan flicker relay SB000010 1 scan
1 scan
0.5-s flicker relay SB000011 0.5 s 0.5 s
1.0-s flicker relay SB000012 1.0 s 1.0 s
2.0-s flicker relay SB000013 2.0 s 2.0 s
0.5-s sampling relay SB000014
1 scan
0.5 s 0.5 s
1.0-s sampling relay SB000015
1 scan
1.0 s 1.0 s
2.0-s sampling relay SB000016
1 scan
2.0 s 2.0 s
60.0-s sampling relay SB000017
1 scan
60.0 s 60.0 s
1.0-s-after-start-of-scan-pro-
cess relay SB000018 1.0 s
2.0-s-after-start-of-scan-pro-
cess relay SB000019 2.0 s
5.0-s-after-start-of-scan-pro-
cess relay SB00001A 5.0 s
E